Wavlink Aerial HS2 extender Setup

Depending on your requirements and intended application, this post will cover three different Wavlink Aerial HS2 extender setup N300 methods.

  • Router
  • Repeater 
  • Lan Bridge

The Wavlink Aerial HS2 Extender is a dual-band wifi range extender. The dead zone at your location is eliminated by the high-power amplifier technology.

The fastest setting of the Wavlink Aerial HS2 N300 allows for speeds of up to 600 megabits per second. On this page, we’ll walk you through the Wavlink N300 setup and Wavlink Aerial HS2 extender setup processes.

Wavlink Aerial HS2 N300 Extender Setup | Repeater Mode

Setting up your extender in repeater mode is one of the easiest setting procedures. To finalize the Wavlink Aerial outdoor extender setup in repeater mode, follow the steps given below:

  • A power supply must initially be connected to the Aerial HS2 POE connector.
  • Connect the POE’s ethernet connection to the extender once the N300 has a solid green signal.
  • Remove any wirelessly capable devices from the area, such as laptops and phones.
  • Additionally, look in the wireless settings menu for the WAVLINK-N network.
  • After joining the default network, open a web browser that is compatible with Internet Explorer. There are three options: Google Chrome, Mozilla Firefox, and Safari.
  • Now type ap.setup or 192.168.10.1.
  • You have arrived at the Wavlink Aerial HS2 outside extender configuration page.
  • To log in, use the “admin” default password.
  • The extender has now been successfully configured to act as a repeater on your present WiFi network.

If you want to use your extender as a repeater, keep in mind that you cannot connect any cables from the POE to the main router or modem.

How to setup Wavlink Aerial HS2 N300 WIFI extender?

Follow these instructions to complete the Wavlink Aerial HS2 extender setup in router mode:

  • To begin, connect the Wavlink N300 connection (POE) box to an outlet.
  • The POE box’s Ethernet cable needs to be linked to the Aerial HS2 extender.
  • Using the same connection box, connect the second Ethernet cable to your main router or modem.
  • Any of your wirelessly capable devices can now be connected to the WAVLINK-N network.
  • After connecting, launch a web browser and navigate to wifi.wavlink.com.
  • You’ve arrived at the N300 extender configuration page.
  • To log in, use the “admin” default password.
  • Select “Router” and give your booster a memorable name.
  • Change the security to WPA2-PSK from none ( recommended ). Enter your extender’s password next, then click “Next.”
  • The Wavlink outside extender has now been successfully configured in router mode.

If you experience difficulties with your Wavlink wifi extender setup. For free assistance, feel free to get in touch with our technical experts at our toll-free hotline or via live chat.

How do i update the firmware on my Wavlink N300?

You must upgrade the firmware on your Wavlink N300 in order to resolve any issues (whether they relate to your extender not providing the necessary speed or something else). It offers new features that will assist you in solving your difficulties in addition to more security components.

Follow the instructions below to update the Wavlink N300’s firmware:

  • You have turned on your Wavlink Aerial HS2.
  • Any smartphone will do.
  • Go to Ap.setup.
  • Select settings and then click on firmware upgrade.
  • To complete the firmware upgrade procedure, adhere to the instructions.
  • During the one-minute waiting period, don’t unplug the booster.

This explains how to update the firmware on the Wavlink N300.

How to reset my Wavlink Aerial HS2 N300 wifi extender?

If you forget your admin username or password and wish to reset your booster, you must first do a factory reset. All of your personal information, including passwords, usernames, and SSIDs, are deleted when you reset the Wavlink N300, preparing your extender for a new setup procedure. A paper clip or a needle, for example, will work to complete the factory reset process.

Reset the Wavlink N300 Aerial HS2 by doing the following:

  • A power source must be connected to your Wavlink N300.
  • Locate the factory reset button in the small hole underneath.
  • On the side panel of the repeater, possibly.
  • Using a paperclip, press the reset button for 8 to 10 seconds.
  • After some time, it will automatically restart.
  • With your extender in hand, you can now begin the new installation process.

If you still require assistance with your Wavlink N300 Aerial HS2, you may get in touch with us by contacting our toll-free number or through live chat. To help you and find a solution, we are available at all times.

Back To Top