Coredy Wi-Fi Extender Setup

Coredy Wi-FI  Extender Setup :Take brand-new Coredy Range Extender Setup if you face problems streaming, playing games, and doing your office work. The wifi range extender increases the network signal strength and enhances the wifi network in real life. 

Coredy Wi-Fi Range Extender Setup:

Coredy Wi-FI Range Extender Setup A wifi range extender is an electronic device that boosts and expands your wifi network and removes your house’s dead areas from the signal. 

This operates as a medium or bridge between the router or access point of the Coredy Range Extender Setup and the devices that are out of its range. This moves the wifi signal to your home or office’s dead zones. 

The signal is received and repeated to the other parts of your house from the data generating device (router, mobile, or computer). 

Coredy Extender setup via web browser: 

• On your mobile device or computer, open the wi-fi network manager software and search for the extension name by default, i.e. ‘Coredy .
• Click the name of the extender and enter an Extender connection password or pin for your mobile device or computer. 
• Open your device’s web browser and search for mywifiext.net, or enter the IP address 192.168.10.1 for Ap.Setup in the address bar. 
• Log in to the admin page if required by entering ‘admin’ as both username and password (both are minuscule). 
• Go to the Mode Wizard and choose the Repeater Option.  
• Click on the select button to select the network to be extender. When the network list is not properly loaded, refresh the list. 
• In the room, enter the password or pin for the existing network. 
• Click Apply and wait for the extender to restart for a few minutes. 
• Look for the extended network and connect to it. (You must enter the same password you entered when connecting to the Extender). 
• The new name of the extended wifi network is ‘Coredy Ext’ by default. 

Coredy Extender Setup Via WPS:

• Push the WPS button located on the front panel of the extender. (After being turned on the WPS-led will blink. 
• Wait 1-2 minutes and push either the router’s WPS button or the access point. 
• After a successful connection, the network name will automatically change to the New Extender Setup. 
• Confirm your connectivity through your wifi device or computer. 
• Unplug the extensor between the halfway point of the extender and move it. 
• Your home or office’s router / access point and weak zones / dead areas. 
• In a higher, raised area, place the extender, which allows for a minimum of barriers such as windows and walls.