skip to Main Content
How To Setup Rockspace Range Extender?

How to Setup Rockspace Range Extender?

Rockspace Range Extender Setup:

Rockspace Range Extender Setup: Have you purchased a brand new Wireless Range Extender from Rockspace? Were you trying to Setup the Rockspace extender manual? But still, confused about how to set up wi-fi range extenders for Rockspace?

You will find the best setup guide for the wi-fi extender here. The Rockspace Local Extender Setup, you do not need an installation CD. Just scroll down and follow the step-by-step instructions of the Rockspace wi-fi extender setup.

First Understand, Then Setup Rockspace wifi Range Extender:

Let’s shed some light on some of the basic features of the wifi extender and how it works. In the wireless Rockspace extender manual, you can also find these characteristics 

Important tip: The features of the New Extender Setup, wi-fi extender, may vary according to the model. We’ve considered the basic features of the wifi range extender. 

  • The wireless range extenders are designed with a speed of 1.2Gbps to support the 802.11ac wi-fi technology. 
  • A high-power 700mW amplifier powered by a dual-core processor for the ultimate extension of the wireless network. 
  • Enjoy the experience of lag-free gaming and feel the wireless network environment with the ultimate 802.11ac speed in every corner of your house. 
  • On the wifi range extender, the smart LED lights help you find an optimal location to place the best wi-fi coverage device. 

Rockspace Extender Setup

Rockspace Range Extender Setup Methods:

To set up wifi range extenders, there are two expert-guided methods, which are: 

  1. WPS Method, aka Protected Wireless Setup Method; and 
  2. Manual Setup Method Ethernet Cable aka Extender 

Important point: Both of these approaches are quite successful and simple. But still, during wifi extender setup, it is also good to take advice from experts. Try updating the firmware of a Rockspace extender before proceeding with the setup process. 

Method # 1: Method for Wireless Protected Setup (WPS) 

  1. If you’re using an older extender for the wifi range? Then, you need to reset it, first of all. Take a clip or a pointed object with a paper pin and press the reset button.  
  2. Try placing your extender near your router at home. 
  3. Plug in an electric power socket with your wireless range extender. Make sure that the proper power supply is given to your wifi range extender. 
  4. Wait a few minutes, then press the button for WPS. 
  5. Until the WPS LED of the extender becomes solid green, do not unplug it. 
  6. Unplug it after that and place it in a new location. Make sure you place your wi-fi range extender halfway between the signals from your home wi-fi router and the dead spots on the network. 
  7. Now, to test the live internet connection, try to connect your computer or laptop to the extended network. 

If you face any difficulty at any stage? Then, get in touch with our experts without any hesitation. We are here 24/7 to provide you with the best support for a wi-fi extender. 

new Extender Setup

 

Method # 2: Method of Ethernet Cable Setup 

  • Try placing your extender near your router at home. 
  • Use a CAT5 Ethernet cable and try to connect to the router with your wifi range extender. 
  • With another Ethernet cable, connect your computer to the router. 
  • Plug in an electric power socket with your wireless range extender and router. Make sure that the proper power supply is given to your wifi range extender. 
  • On your computer, run any web browser and visit the login page for re.rockspace.local OR AP.Setup. If you have not visited the login page for the extender, try using the default IP address of your extender. 
  • You’ll land on the web page of the Rockspace extender admin panel. 
  • Enter the default login credentials for the Rockspace wi-fi extender, and then hit the ‘Sign In’ or ‘Log In’ button. 
  • You’re going to land on the web page with the wi-fi range extender setup. 

Rockspace Wi-FI Extender Setup

  • To continue the setup process, choose the ‘extender’ option. 
  • Now, follow the instructions on-screen. 
  • Once done , click to apply the final modifications on the ‘Save’ button.
  • Unplug it after that and place it in a new location. Make sure you place your wifi range extender halfway between your network signals from your home wifi router and the dead network spots.
  • Now, to test the live internet connection, try to connect your computer or laptop to the extended network. 

It’s that! Finally, you’re done here. Somehow, if there is still some confusion about how to set up a wifi range extension? So, well, you know, we’re always here to beck you up.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top