skip to Main Content
Dodocool DC39 Extender Setup

Dodocool DC39 Extender Setup

Dodocool DC39 Extender Setup:

Dodocool is an extender for the wi-fi network. But what’s clear is that what is an extender of the wi-fi network, and why do we need it? Wi-fi extenders will let us utilize our smartphones in our homes or workplaces where the network is not available. Home router range is often not just adequate to provide a powerful and reliable wireless signal through households. To ease this, gadgets such as the wall-mounted wireless range extender Dodocool DC39 Extender setup  are extremely beneficial. Only the furthest areas of homes can hit it. It has a wireless communication transmission rate of 300mbps and 2.4 GHz via wireless N(802.11n) and can operate up to a distance of 100 meters. Better wireless efficiency and reliability are assured by dual incorporated antennas. The design of the Dodocool dc39 extender setup can be achieved in numerous ways.

Dodocool Extender setup

Dodocool DC39 Extender Setup via ap.setup OR 192.168.10:

  • Attach the extender directly into the green light electrical port, which means that the DC39 extender is ready for Setup.
  • Now, go to your mobile / computer and press WiFi and connect to your Wireless-N network. This is the default term for the Dodocool Extender network.
  • Open the IP address 192.168.10.1 of the chrome form or simply type ap.setup in the address bar.
  • A DC39 extender Setup page can open and enter “admin” for both username and password.
  • Scanning begins on the computer where the network list is shown. Pick from the list the key wi-fi network and insert the password.
  • Applying the Setup  can take approximately 50 seconds and after that it will reset. You will connect to the internet. The Extender will come as your home network .

 

Dodocool DC39 extender setup  Via WPS Method:

  •  You have to attach the extender to an electrical socket.
  • It should be in the same space as your router. Green light blinks, indicating that it is possible to start setting up the Dodocool dc39 extender.
  • Make sure you pick the proper move from router mode, signal repeater / range extender mode, on your dc39 extender.
  • Push the WPS on your router now and push the WPS button on the New Range Extender Setup  within 2 minutes. On the side of the extender, there is a  Dodocool WPS press.

  • You’ll see both the WPS indicator and the router flashing on the extender. And the Wi-Fi light on the dc39 can transform solid until configured.
  • You can now transfer this extender and attach your computer to the wi-fi deficient region.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top